What do u clean pewter with

If the corrosion remains, use a flannel cloth to polish it off. Removing the corrosion by this method may take a while. If the corrosion is stubborn, put a small amount of mineral oil on a piece of fine-grade steel wool and very gently rub off the corrosion. Be very cautious not to press too hard as the steel wool can scratch the pewter. Remember that this is pewter. Brush satin pewter with steel wool. Steel wool should You can apply the polish with steel wool or use the steel wool while the polish is fresh.

Very gently, move the steel wool in the direction of the grain. This will make satin pewter look new again. This process should only be done once a year at most. Rinse off the paste. Use warm water to wash away the paste. Place the pewter object under a running faucet or use soft, damp cloth.

Dry the pewter. Take a clean, soft cloth. Move it over the surface of your pewter object to remove all water. Method 3. Boil linseed oil. All you need is a little bit of the oil to make a second, optional paste. Place it in a pan or pot on the oven and leave it until it is hot and ready to be mixed to form a paste. This paste will serve as a more potent cleaner to abrade stains. Mix in rottenstone.

Rottenstone is a powdered limestone. Look in a home care center for it. Add an equal amount of it to the linseed oil. Again, all you need is a small amount, enough to spread out along the surface of your pewter. This paste is great for dull and matte finishes, but should never be used on oxidized pewter. Cool the paste. Turn off the stove and remove the pot with the paste if you wish. Let the paste rest until you can use it without burning yourself or damaging the pewter with heat.

Use a soft cloth to pick up the paste and transfer it to the surface of your pewter. With circular motions, move the rag to distribute the paste over the entire surface of your object. Rinse immediately. Move your pewter item to a faucet of warm water. Let the water rinse off any trace of the pace. Alternatively, place a soft cloth in warm water and use it to wash away the paste. Get another soft, clean cloth for drying. Rub the cloth all along the surface of the pewter, making sure to remove every last bit of water.

Try to use a soft detergent. You can use a detergent for metal to soak the pewter and remove stains. Rinse in warm water and dry with a soft cloth. For deeper scratches, you can try buffing with steel wool or a scrub pad.

Be sure to move with the grain and be gentle while doing so. Also try polishing with a commercial polish or a made paste. Not Helpful 0 Helpful 7. It's difficult and you should consider taking it to a professional. Broken pieces can be soldered on. Scratches can be buffed out by carefully using polish paste and steel wool. Heat damage is unlikely to be fixed. Not Helpful 0 Helpful 3.

Try bending it back by hand or with pliers. Gently rub the moistened cloth over the pewter jewelry or for how to clean tarnished costume jewelry made from another metal. Pewter is a soft metal, so being too vigorous in your cleaning could result in the pewter bending or breaking. Rinse the cleaning cloth with water and wipe the jewelry down to remove the soap.

Finally use a clean, dry cloth to gently dry the pewter jewelry. Often soap and water are all you need to get your costume or pewter jewelry clean. You only want to polish pewter jewelry every so often, when you think that it is starting to look dull. Just like when cleaning silver , to polish pewter, place a small amount of pewter metal polish see above recipe on an old rag. Apply the polish to the jewelry using gentle strokes along the grain of the pewter.

Gently rub the polish into the pewter. With another cloth, rub the polish off the pewter jewelry. Use a soft fabric to buff the pewter to finish cleaning. However, if it contains lead, after a period you will notice it start to blacken. On the other hand, you may want to purposely tarnish pewter to give it character. You can learn how to patinate brass , pewter, and silver easily. There are several mixtures you can use, but one of the most common is rubbing vinegar over the surface and letting it sit.

Then, you just rinse off the vinegar. You are left with an antique-looking piece that is certain to impress your guests. Since pewter is an alloy of tin and iron, it will not rust, but you may experience a bit of oxidation after a period. The quickest way to ruin your pewter products is to put them in the dishwasher. Pewter is an incredibly soft metal with a low melting point. The hot water in the dishwasher can warp the pewter pieces if you leave them for too long.

Additional cleaning is dependent upon the type of pewter finish and your personal preferences. All types of pewter finishes will eventually need to be washed to remove dust or food particles. Automatic dishwasher detergent is too abrasive for pewter pieces, so skip the dishwasher and hand-wash pieces instead. The high temperatures in a dishwasher can also be harmful. Fill a sink or bucket with hot water and add a few drops of dishwashing liquid.

Submerge the pewter pieces and gently wash them with a microfiber dishcloth or sponge. If the piece cannot be submerged, wring most of the moisture out of a dishcloth and wipe down the surface.

Rinse each pewter piece with hot water or wipe down with a clean dishcloth dipped in fresh hot water to remove any soapy residue. Use a microfiber cloth to dry each pewter piece to prevent water spots from any minerals in the rinse water.

If you would like to add a bit more shine or lighten the color of matte pewter, it can be polished. Silver polish should not be used because it can damage the surface of the pewter. Choose instead a commercial polish like Brasso or Hagerty that is recommended for pewter. Follow product directions and use a gentle touch while cleaning—no scrubbing!